Features:   

  BRT-306C is a ceiling mount occupancy sensor switch which utilizes passive infrared (PIR)

  sensor to detect the heat (in the form of infrared energy) from people moving within a space. It can

  determine when a space is occupied and turns on or turns off the loads automatically. It has an

  advanced micro controller unit and uses a proprietary signal processing technique to avoid false

  triggers.

  l Instant on and adjustable delay off time from 10 seconds to 15 minutes;

  l Ambient light override. Automatically measures the ambient light level, and there is no

           trigger on when it is above a light level which can be set by the user;

  l Easy installation onto the ceiling with or without a holder;

  l Load power up to 1200W;

  l Good for all kinds of loads (resistive, capacitive, and inductive);

  l ABS-V0 flame resistance material; and

  l High quality build.

  Fig. 1 and Fig. 2 show the front view and the back view of the BRT-306 PIR occupancy sensor

  switch respectively.

      Specification Parameters:

      Wiring Diagram and Installation Guide:      

  BRT-306 PIR sensor switch requires both hot wire and neutral wire for installation:

              Hot wire (ACL):           Coming from the power line with 220V;

              Neutral wire (ACN):     Usually coming with the hot wire; and

              Load wires (Ns):           Going to the load.

  Fig. 3 shows the wiring diagram. Wiring must be done according to the diagram and the labelled

  ports of the switch.

    Installation Guide:

  There are two ways to install BRT-306C PIR sensor switches to the ceiling. Fig. 4 and Fig. 5 show

  the step-by-step installation instructions, respectively.

  Warnings: 

  1.    Please make sure power is turned off before starting installation!

  2.    Load shorting or using a load with a power rating higher than the specified wattage of the

      sensor switch is prohibited.

  Cautions:

  1.    Avoid mounting the sensor switch close to air vents, as the vibration and air flow can reduce

      the effectiveness of the sensor switch;

  2.    Avoid installing the sensor switch in an electrical circuit which has other frequent on/off

      switch or appliance, as those on/off actions could cause false triggers.

Shipping policy

Make sure you provide the correct delivery address and tel.

All goods will be free shipped to the shipping address provided by you.

We shipping by china post air parcel to your delivery address of your country.

Attention: CUSTOMS EXPENSES ARE CHARGED BY BUYERS.

Refund Policy

If for any reason you are not satisfied ,you can return the item to us in it's original condiion for a refund or an exchange.

Before mailing us back the item,please contact us for the detailed return & exchange instruction.

We will return all your money except the shipping and handling fees after we receive your return items.

Feedback